20mm Conduit Stop end with 10mm hole & allthread [PLU82075]

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 2

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 3

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 4

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 5

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 6

20mm Conduit Stop end with 10mm hole & allthread [PLU82075] - Image 7

20mm Conduit Stop end with 10mm hole & allthread [PLU82075]

Name: Conduit 20mm to 10mm end cap
SKU: PLU82075
Price: 5.99 GBP
Availability: InStock
Rating: 5 (4 reviews)

£5.99

233 in stock (can be backordered)

20mm Conduit Stop End with 10mm Hole & Allthread

This is perfect for adding a lampholder to your pipe work, or maybe a cord grip to use as a cable entry point.

This product does not come with any cord grips or lamp holders, the pictures are just examples of what you can do.

Please Note: Due to the nature of galvanised conduit this end plug may not tighten up tight, so we would recommend a dab of super glue on the thread to ensure it stays tight.

Spec:

Allthread

Length: 15mm
Thread: 10mm
Inside Diameter: 6.5mm

Stop End

Thread: 20mm
Threaded Hole: 10mm
Width: 22mm
Height: 13mm

Weight	100 g

Super

Super just right

Brilliant

Just what I was after 👍, will purchase again..

20mm Conduit Stop end with 10mm hole & allthread [PLU82075]

Works excellent with 'Chrome BC Un-Switched Lampholder 10mm Entry [PLU98466]'
I used a bit of thread lock to lock the 2 pieces together. From the picture it's hard to tell that it's 2 pieces, however that does allow for some adjustment