BC | B22 | Bayonet Cap Copper Switched Lampholder 10mm Entry 3195180
£6.39
49 in stock
BC | B22 | Bayonet Cap Copper Switched Lampholder 10mm Entry 3195180
This BC | B22 | Bayonet Cap Copper Switched Lampholder 10mm Entry 3195180 is an excellent option for brightening up a sentimental table lamp or light fitting of your own design. With the sliding bar switch on the connection unit, it adds a lovely timeless feature to the light fitting.
Comes in 4 parts comprising of the cap which is the section that screws onto the fixing of the light fitting (or cord grip for a pendant lamp) the centre connection unit where you will connect the live (Brown) and neutral (Blue) and Earth (Yellow and Green) then the top section which will screw over the connection unit and onto the cap. Not to forget the locking ring (Thicker Ring) that holds the cap and skirt together and the shade ring the clamp the shade (Thinner Ring).
The manufacturer of BC | B22 | Bayonet Cap Copper Switched Lampholder 10mm Entry 3195180 is S. Lilley & Son Limited which is a family business, based in Birmingham and is one of the UKs leading manufacturers of specialised lighting components. They were founded in 1840, so we know we are in good hands and the quality of their products really speak for themselves. All of their components are BS EN ISO 9001 registered, and the company is LIA (Lighting Industry Association) approved.
This Lampholder must be wired with a 3-core flex that provides the correct earth connection.
Spec:
- Lampholder Cap: BC | B22 | Bayonet Cap
- Thread: 10mm x 1mm Pitch
- Height: 60mm
- Diameter including shade ring: 32mm
- Switched: Yes
- Material: Brass
- Finish: Copper Plated
| Weight | 55 g |
|---|
did just what it said
Just what I was after, it has a great finish and looks fab. It was just a small project for my son so he would remember not to drive through a flood and damage his engine again!
Good quality product and done the job nicely. Product came in time.
I bought 8 of these to make an 'industrial' look ceiling room light array with low energy warm LED bulbs. They look very cool (to us) with an attractive finish alongside copper pipe trunking. Very happy. Can fit hollow threaded bar to attach the fittings (or pay quite a lot extra to buy ready to use compression fittings that attach). Need to be careful wiring up as the copper threads are soft and easy to mis-thread but no problem if you are careful (I was after the first!).
Lovely products but I didn’t receive the correct sized tubing apparently out of stock but the replacement wasn’t any good for my project
Excellent item , very pleased
.
Excellent product
