Lampholder Kit 11 For 28-30mm Holes KIT11
£7.49
1 in stock (can be backordered)
Lampholder Kit 11 For 28-30mm Holes KIT11
This kit is designed to be installed on a panel or item where you can get both sides of the hole.
Easy installation simply push the lampholder through the hole then you will use the wide shade ring to then thread onto the lampholder which will clamp the lampholder into position.
This kit can be used on any material that has a max hole size of 30mm.
Please Note: Light bulb not included
Spec:
Max Hole Size: 30mm
Min Hole Size: 28mm
Max Hole Depth: 11mm
Lampholder Height (ex cord grip) 54mm
Cable Length: 2.5Mtrs
Cable Size: 0.75mm
Cable Dimensions: 4mm x 5.7mm
Distance From Switch To Unwired End: 800mm Approx.
Lampholder Material: Phenolic Thermosetting Resin Plastic
Lamp Style: SES | E14 | Small Edison Screw
| Weight | 149 g |
|---|---|
| Base Type |
I bought this to restore a lamp fitting in an old vintage globe. This was perfect! Took a bit of fiddling around with (mostly as there was some sort of attachment on the globe itself already) but it did the trick beautifully!! The instructions included are not the clearest if you have no clue about electrical things (like me) but online guide was fab! So happy to have this beautiful glove restored and glowing!
Did the job... Saved me buying a new lamp base
I bought these to use in a lithophane lamp I designed and printed, and the quality is good along with easy assembly using the clear instructions. Supplied items are slightly different to the picture (plug and switch), but they do the same job.
Lampspares web sit is impressive with help and advice easily available and on hand. Communications and service are excellent.
The actual item was fit for purpose and came assembled with sealed tamper-proof plug fitted, (but it does look a little cheep) sorry.
Would recommend and use Lampspares again.
Delighted with the service, perfect fit with the base which is still to be coloured, and maybe a black shade with silver flecks probably 40cm if you have anything in stock.
This is my second time buying from this site. Very happy and good to use for DIY projects.
These have been ideal for my Lithophane 3D printed night lights, only small gripe I have is instructions could be better, but would not mark them down for that
Hi Terry,
Thank you for your review we do say at the top of the instructions a guide can be found on our help centre here: https://support.lampspares.co.uk/hc/en-gb/articles/360019783254-Kit-11-Installation-Guide
This will give you a full step by step guide it may help for future projects :-)
Thanks
I bought this to replace the flex and fitting in an old lamp that we have had for years. I'm not an electrician so thankfully was dead easy to fit. Delivery was quick. Would use again
Just what I needed for making some small table lamps. The kit instructions on Lampspares help centre site tell you exactly how to assemble it (which is very easy.) Will buy again.
got what i ordered, don't believe it was good value for money.
Related products
