Lampholder Kit 9 For Wooden Lamp Bases With Nipple Fixing KIT9
£6.99
2 in stock (can be backordered)
Lampholder Kit 9 For Wooden Lamp Bases With Nipple Fixing
Lamp Kit 9 Allows the White Switched BC Lampholder to be fitted onto a Wooden Lamp base with no fixing showing. The Wood Nipple is screwed into the base of the lampholder and then screwed into the wood, use a 9.5mm or 10mm pilot hole depending on how hard the wood is. You can then remover the top part of the lampholder to finished the wiring.
As the lampholder is plastic dont put too much force on it when adding the nipple to the wood.
This kit uses a 10mm nipple and lampholder of is you need to raise the height see the related products for ideas.
The flex is 2.0m long.
| Weight | 145 g |
|---|---|
| Base Type |
I have a hobby, of making hand turned wooden lamps, i have been looking for lamp kits, and i found your company surfing the internet, i have fitted a couple of my lamps with your product, And i am very pleased with the out come.
Need to repair old lamp. Kit identical to existing so was able to just swap out damaged bits. Good service, perfect kit and quick delivery.
The metal attachment had had it's thread ruined and this was just the job.
Related products
