Rubber Bung 16-18mm With 10mm Allthread [PLU10179]
£4.29
146 in stock (can be backordered)
Rubber Bung 16-18mm With 10mm Allthread.
We have constructed a special 16-18mm Rubber Bung that allows the use of a flex up to 6.8mm in diameter.
There is room on the bottom for a female cord grip to be added but it will spin when the bung is tightened up.
The bung is tightened by using a spanner on the top steel nut until a snug fit. A Nut cover can then be used to cover this nut. The bung can be fitted even when there is a flex in place.
Spec:
Fits a bottle: 16-18mm
Inside diameter max: is 6.8mm
Height: 35mm
| Weight | 20 g |
|---|
This is the best light fitting I have ever used, so simple to use on my Man Lamp, if you are unsure how it works, the fitting instructions are so easy to follow, I need to change the bulb holder for a hinged type,
Returned as not suitable for my bottle lamp
This bung, coupled with a side entry lamp holder proved the ideal solution for converting a 19th century gimballed ship's cabin lamp to an electric wall lamp. A repro Edison candle bulb completed the effect of a ship being modernised with electric lighting.
Great bit of kit
Used the rubber bung, switched brass lamp holder, 3 core twisted braided flex, and flex grip purchased from lamp spares to repurpose a small cider flagon into a table lamp.
Has saved many a bottle lamp, so simple but works a treat.
Excellent for making lamps anything with hole in gives a nice finish
Great service, as advertised
Great product. Works a treat.
I had a lamp base made but the clay was too thick and hole too large for a standard fitting. This simple device was fitted in a couple of minutes and completed the job nicely.
