Rubber Bung 30-34mm With 10mm Thread 4708576
£5.99
133 in stock (can be backordered)
Rubber Bung 30-34mm With 10mm Thread 4708576
The Rubber Bung 30-34mm With 10mm Thread 4708576 is the
perfect fixing for holes that vary between 30-34mm and comes with a 10mm
thread that will allow you to add a 10mm lampholder or your choice. The
bung can be tightened up by using a spanner on the top steel nut until
it is snug in the hole, leaving you with the ultimate fixing.
There is room on the bottom of the bung for a female cord grip to be
added but it will spin when the bung is tightened up. The bung is hollow
through the centre, and this will allow a cable with the max outside
diameter of 6.8mm to fit through, alternatively you can use a side entry
cord grip.
If you are unsure on what bung size you require here is a help guide to
measure the neck of your bottle to get the correct size: https://support.lampspares.co.uk/hc/en-gb/articles/360012602653-Measuring-Bottle-Hole-For-Bung-Size and also here is a video on how to tighten and fit our Rubber Bungs: https://support.lampspares.co.uk/hc/en-gb/articles/360011861353-Video-How-To-Tighten-up-our-Rubber-Bungs-
Spec:
- Height: 35mm
- Thread: 10mm
- Inside Diameter: 6.8mm
- Fits a Bottle Size of: 30-34mm
- Finish: Brass
| Weight | 41 g |
|---|
