Rubber Bung For Lampholder Vase Fixing 14-15mm [05750 PLU32660]
£3.99
48 in stock (can be backordered)
If you need to fix a 10mm lampholder onto a bottler or vase fit one of these Rubber Bung 14-15mm and then add a lampholder with a 10mm screw entry fixing.
As you tighten up the screw on the top of the bung the rubber is compressed and grips the bottle or vase. These Rubber Lampholder Bungs have a hole through the middle to allow the flex to come up.
Fixing hole diameter 14mm to 15mm
Please note ? The internal diameter of this bung is 5.5mm so the only flex that will pass through with the insulation is 0.5mm All Braided and 0.75mm flex you cannot pass the insulated part of the flex through
Unsure of how I could fix a bulb holder to a glass neck but this little item made it so easy, brilliant. The service received really good and the products offered make life simple.
Ok but the expansion range is very limited so you need to check the bottle neck diameter very accurately and order the right one. I had to wind tape layers to make it fit.
Would recommend - all good quality and did the job!
Good product. Still a bit loose, but that is my problem. I should have measured the hole size more carefully.
