SES | E14 | Small Edison Screw Black Plain Lampholder LH17
£1.49
SES | E14 | Small Edison Screw Black Plain Lampholder LH17
This E14 plastic lampholder is a great replacement to give your lamp a
new lease on life, you can also add one of our 10mm Male thread cord
grips and use the lampholder in a pendant style light fitting.
Also known as an Small Edison Screw or SES lampholder and takes the small screw in style light bulb.
This lampholder is fully CE certified and has all the relevant documentation such as RoHS certification from the manufacturer.
Comes in 3 parts comprising of the cap which is the section that screws
onto the fixing of the light fitting (or cord grip for a pendant lamp)
the centre connection unit where you will connect the live (Brown) and
neutral (Blue) then finally the top section which will screw over the
connection unit and onto the cap.
The SES | E14 | Small Edison Screw Black Plain Lampholder LH17 does not accept a lampshade so will not be able to install one on the lampholder itself, these are generally found on pendant light fittings where you want to add a decorative lamp and show it off.
There are 2 options for this lampholder:
- 10mm Plastic Thread: This is all plastic this will be used if you only have a 2core cable and there is no provision for an earth cable. This does not have a locking screw so a dab of super glue may be required.
- 10mm Metal Thread: This has a metal thread in
the base with a locking screw to lock the lampholder onto your 10mm
thread. - 10mm Metal Earthed Thread: This has a metal thread in the base with a locking screw to lock the lampholder onto your 10mm thread, also has an earth connection and should only be used if you have a 3core cable with earth
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm (Metal, Plastic Thread)
Height: 59mm (Metal Earthed Thread)
Diameter: 26.6mm
Material: Phenolic Thermosetting Resin (Bakelite)
Thread Entry: 10mm
| Weight | 30 g |
|---|---|
| Colour |
Great service and product quality.
Black lampholder matches all-black beer lamp (cable, switch and plug)
'Decor' bulb makes it fun. ( note label says LIGHT - which it is! )
__original__original.jpg?auto=format)
__original__original.jpg?auto=format)
Had a set of wall lights with SBC fitting that were damaged by heat from previously fitted candle halogens. As you are probably aware SBC lamps are an absolute pain to get hold of so these were a perfect straight swap replacement allowing a switch to readily available SES.
Delivery was quick and the product arrived well packed and in excellent condition. Would shop again without question.
Just the fitting i required ,The christmas post did not help as we do not get a post every day,but i did know it had been posted and was on its way because of the tracking .Thanks will use you again,
Excellent product and very good service, many thanks
order was good arrived ok I used them to convert a lamp with sbc holders now out of date
all products received on this order were correct in good order and fitted perfectly
After trailing round electrical/diy shops to no avail found exactly what I wanted at Lampspares. Delivered very quickly. Would shop here again.
Excellent service
This was exactly what we needed to complete our light fitting
