ES | E27 | Edison Screw Threaded Push Wire Lampholder With 10mm Entry
This ES | E27 | Edison Screw Threaded Push Wire Lampholder With 10mm Entry is the
impeccable replacement for a table lamp or why not simply add a 10mm
male cord grip to turn this lampholder into a pendant lampholder.
This lampholder is fully CE certified and has all the relevant documentation such as RoHS certification from the manufacturer.
The White Threaded E27 Lampholder with Push Wire Terminals comes in 2
parts. There are no screw terminals for the
wires on this lampholder so your wires must have either a ferrule or be
soldered so they can be pushed into the terminals. Please note that
once the wires are pushed in they are not intended to be taken out
again.
There are 2 options for this lampholder:
- 10mm Plastic Thread: This is all plastic this
will be used if you only have a 2core cable and there is no provision
for an earth cable. This does not have a locking screw so a dab of super
glue may be required. - 10mm Metal Thread: This has a metal thread in the base with an earth connection and should only be used if you have a 3core cable with earth.
Comes with 2 additional shade rings to secure a shade into position.
Spec:
- Lamp Cap: ES | E27 | Edison Screw
- Height: 61mm
- Max Diameter For Shade: 43mm
- Min Diameter For Shade: 40mm
- Entry Thread: 10mm
- Max Wattage: 60w
- Material: Plastic